• Diamond Non Ceramic Tread Lagging 1000mm length

    Sold By: Abear

    FEATURES

    • CN Bonding Layer for stronger bonding to pulley face.
    • Large Diamond pattern for superior expulsion of fines, moisture and water.
    • Exceptional abrasion resistance.
    • Easier handling and installation when compared to wide rolls of pulley lagging.
    • Greater versatility and less waste when compared to wide rolls of pulley lagging.
    $150.00$160.00 ex VAT
    Sold By: Abear

    Diamond Non Ceramic Tread Lagging 1000mm length

    $150.00$160.00 ex VAT
  • EZ Tread Lagging 1000mm length

    Sold By: Abear

    Features:

    • 20mm square tiles for improved flexibility and even contact with conveyor belt.
    • Deep chamfered groove between each row of tiles for dispelling water and dirt, designed to minimise material entrapment (Detail B).
    • Cut lines spaced every 25mm so lagging will suit all pulley sizes.
    • Chamfered cut lines between each tile assist with accurate cutting to size (Detail C).
    • Additional benefit of chamfered cut lines is further improved expulsion of water and dirt (Detail C).
    • Ceramic tiles are prepared through an automated spraying process, giving a consistent 100% rubber tear strength bond.
    • Back surface of Ceramic Tile is ridged for additional bond shear strength.
    • Ceramic tiles are embedded in rubber on all sides.
    • High strength abrasion resistant rubber.
    • CN bonding layer for high bonding strength to pulley surface.
    • Available thicknesses: 12mm; 15mm; 20mm; 25mm
    $165.86$253.45 ex VAT
    Sold By: Abear

    EZ Tread Lagging 1000mm length

    $165.86$253.45 ex VAT
  • EZ Tread Lagging Fire Resistant 1000mm length

    Sold By: Abear

    Features:

    • 20mm square tiles for improved flexibility and even contact with conveyor belt.
    • Deep chamfered groove between each row of tiles for dispelling water and dirt, designed to minimise material entrapment (Detail B).
    • Cut lines spaced every 25mm so lagging will suit all pulley sizes.
    • Chamfered cut lines between each tile assist with accurate cutting to size (Detail C).
    • Additional benefit of chamfered cut lines is further improved expulsion of water and dirt (Detail C).
    • Ceramic tiles are prepared through an automated spraying process, giving a consistent 100% rubber tear strength bond.
    • Back surface of Ceramic Tile is ridged for additional bond shear strength.
    • Ceramic tiles are embedded in rubber on all sides.
    • High strength abrasion resistant rubber.
    • CN bonding layer for high bonding strength to pulley surface.
    • Available thicknesses: 12mm; 15mm; 20mm; 25mm
    $179.66$280.69 ex VAT
    Sold By: Abear

    EZ Tread Lagging Fire Resistant 1000mm length

    $179.66$280.69 ex VAT
  • Gecko Tread Lagging 1000mm length

    Sold By: Abear

    Features:
    • 20mm square tiles for improved flexibility and even contact with conveyor belt.
    • Deep chamfered groove between each row of tiles for dispelling water and dirt, designed to minimise material entrapment (Detail B).
    • Cut lines spaced every 25mm so lagging will suit all pulley sizes.
    • Chamfered cut lines between each tile assist with accurate cutting to size (Detail C).
    • Additional benefit of chamfered cut lines is further improved expulsion of water and dirt (Detail C).
    • Ceramic tiles are prepared through an automated spraying process, giving a consistent 100% rubber tear strength bond.
    • Back surface of Ceramic Tile is ridged for additional bond shear strength.
    • Ceramic tiles are embedded in rubber on all sides.
    • High strength abrasion resistant rubber.
    • CN bonding layer for high bonding strength to pulley surface.
    • Available thicknesses: 12mm; 15mm; 20mm; 25mm

    $205.17$320.69 ex VAT
    Sold By: Abear

    Gecko Tread Lagging 1000mm length

    $205.17$320.69 ex VAT
  • Gecko Tread Lagging Fire Resistant 1000mm length

    Sold By: Abear

    Features:
    • 20mm square tiles for improved flexibility and even contact with conveyor belt.
    • Deep chamfered groove between each row of tiles for dispelling water and dirt, designed to minimise material entrapment (Detail B).
    • Cut lines spaced every 25mm so lagging will suit all pulley sizes.
    • Chamfered cut lines between each tile assist with accurate cutting to size (Detail C).
    • Additional benefit of chamfered cut lines is further improved expulsion of water and dirt (Detail C).
    • Ceramic tiles are prepared through an automated spraying process, giving a consistent 100% rubber tear strength bond.
    • Back surface of Ceramic Tile is ridged for additional bond shear strength.
    • Ceramic tiles are embedded in rubber on all sides.
    • High strength abrasion resistant rubber.
    • CN bonding layer for high bonding strength to pulley surface.
    • Available thicknesses: 12mm; 15mm; 20mm; 25mm

    $189.66$289.66 ex VAT
    Sold By: Abear

    Gecko Tread Lagging Fire Resistant 1000mm length

    $189.66$289.66 ex VAT
  • Onyx Tread Lagging 1000mm length

    Sold By: Abear

    High Traction, Anti-Resonance and Anti-Vibration Design

    The Impact of Vibration

    The value of Rubber Backed Ceramic Lagging in terms of traction, life of the conveyor belt and fire safety, is well understood. However, most Rubber Backed Ceramic Laggings available in the market introduce significant vibration into the conveyor system. This is due to the regular linear arrangement of the ceramic tiles and large horizontal grooves that result in a hammering effect as each row of ceramic tiles comes into contact with the underside of the conveyor belt. This vibration impacts on the life of other components in the conveyor system, especially on the bearings, pulley shafts, nearby idlers and gearboxes.

    How ONYX Tread Reduces Vibration

    The rows of tiles and diamond patterns vary around the circumference of the pulley. This lack of a regular pattern prevents the build-up of vibration. This concept is seen in the tread design on most vehicle road tyres. In addition, the ceramic tiles are narrow (only 15.5mm) and the gap between the last tile in a horizontal row and the first tile in the next row is minimal. The minimal gaps and narrow tiles allow the Pulley Lagging to conform to the cylindrical face of the pulley. This design feature eliminates the undesirable hammering effect and ensuing vibration that occurs.

    $194.83$294.83 ex VAT
    Sold By: Abear

    Onyx Tread Lagging 1000mm length

    $194.83$294.83 ex VAT
  • Onyx Tread Lagging Fire Resistant 1000mm length

    Sold By: Abear

    High Traction, Anti-Resonance and Anti-Vibration Design

    The Impact of Vibration

    The value of Rubber Backed Ceramic Lagging in terms of traction, life of the conveyor belt and fire safety, is well understood. However, most Rubber Backed Ceramic Laggings available in the market introduce significant vibration into the conveyor system. This is due to the regular linear arrangement of the ceramic tiles and large horizontal grooves that result in a hammering effect as each row of ceramic tiles comes into contact with the underside of the conveyor belt. This vibration impacts on the life of other components in the conveyor system, especially on the bearings, pulley shafts, nearby idlers and gearboxes.

    How ONYX Tread Reduces Vibration

    The rows of tiles and diamond patterns vary around the circumference of the pulley. This lack of a regular pattern prevents the build-up of vibration. This concept is seen in the tread design on most vehicle road tyres. In addition, the ceramic tiles are narrow (only 15.5mm) and the gap between the last tile in a horizontal row and the first tile in the next row is minimal. The minimal gaps and narrow tiles allow the Pulley Lagging to conform to the cylindrical face of the pulley. This design feature eliminates the undesirable hammering effect and ensuing vibration that occurs.

    $210.34$329.31 ex VAT
    Sold By: Abear

    Onyx Tread Lagging Fire Resistant 1000mm length

    $210.34$329.31 ex VAT
  • Triangle Non Ceramic Tread Lagging 1000mm length

    Sold By: Abear

    FEATURES

    • CN Bonding Layer for stronger bonding to pulley face.
    • Large Diamond pattern for superior expulsion of fines, moisture and water.
    • Exceptional abrasion resistance.
    • Easier handling and installation when compared to wide rolls of pulley lagging.
    • Greater versatility and less waste when compared to wide rolls of pulley lagging.
    $150.00$160.00 ex VAT
    Sold By: Abear

    Triangle Non Ceramic Tread Lagging 1000mm length

    $150.00$160.00 ex VAT

Main Menu